loading
reading
writing
saving
searching
Rockler Lathe Duplicator - Barely Used from Jan 2024 - $350
QR Code Link to This Post
I tried some non-destructive modifications to help it fit, but it never quite worked right for me.
I also modified the depth adjuster for a little more control. I left it in place, but it can be removed and returned to stock by removing three bolts and putting one original bolt back on.
I only used to cut three spindles.
From the manufacturer:
https://www.rockler.com/lathe-duplicator-and-optional-replacement-cutter
Lathe Duplicator
One good turn deserves another! Create precise duplicates of spindles, table legs and other turned projects.
$459.99
One good turn deserves another! Create precise duplicates of spindles, table legs and other turned projects. This Lathe Duplicator attaches easily to almost any floor-model lathe, and the handwheel allows for smooth operation while cutting.
Features:
Will duplicate to a maximum length of 39" (depending on the lathe used)
Maximum duplication depth-of-cut of 2-3/8"
Suitable for lathe with a turning diameter of 12" to 14"
Manufacturer Part Number
TAT940808R
Weight
44.00
Tech Spec
Will duplicate to a maximum length of 39" (depending on the lathe used)
Maximum duplication depth-of-cut of 2-3/8"
Suitable for lathe with a turning diameter of 12" to 14"
Unit of Measure
Each
Type
Duplicator
It's located near s. Kipling and w. Belleview, unincorporated littleton (Golden/lakewood), 80127
Seller information
Chris Werstiuk