loading
reading
writing
saving
searching
Clearance Interior Paints (Denver/ Baker)
29 Kalamath Street near Ellsworth
QR Code Link to This Post
We're offering the following items at clearance prices:
-Safecoat Gallon Interior Paint Eggshell (untinted): x2 ($19.99 - Each)
-Safecoat Quart Interior Paint Eggshell (untinted): x17 ($4.99 - Each)
-Safecoat Gallon Interior Paint Flat (untinted): x10 ($19.99 - Each)
-Safecoat Quart Interior Paint Flat (untinted): x18 ($4.99 - Each)
-Safecoat Quart Interior Paint Pearl (untinted): x4 ($4.99 - Each)
-Safecoat Gallon Interior Paint Pearl (untinted): x4 ($19.99 - Each)
-Safecoat 5-Gallon Interior Paint Semi-Gloss (untinted): x2 ($99.99 - Each)
-Safecoat Gallon Interior Paint Semi-Gloss (untinted): x6 ($19.99 - Each)
-Safecoat Quart Interior Paint Semi-Gloss (untinted): x15 ($4.99 - Each)
THESE PAINTS ARE ONLY AVAILABLE UNTINTED
About Safecoat:
Safecoat is the leading provider of environmentally responsible, sustainable and non-polluting paints, stains, wood finishes, sealers and related green building products.
About the Interior paint:
USE ON:
New or existing, properly primed interior walls and ceilings, properly cured and primed plaster (below 10 pH), masonry, woodwork and primed metal.
SURFACE PREPARATION:
Surfaces should be sanded and cleaned of dirt, grease, mildew and oil. Cleaning with an odor-less, dye free, all-purpose cleaner. To achieve an even, consistent finish, the underlying surface must be evenly sealed. Previously painted surfaces in poor condition need to be scraped and sanded smooth before priming. Always spot test for adhesion over prior coatings. Sand porous new wood and prime. Water and other stains must be blocked so they do not bleed through. In all cases, the best finish will be achieved with a primer and two finish coats. Environmental conditions are crucial: if the air temperature is too hot or too cold, the product will not cure properly; if the air or the wood is too dry, or there is too much moisture in or on the surface, other problems may result. In addition, many surfaces contain water-soluble tannins or acids which are activated by the application of water based products
and will “bleed through” to the surface. All of these conditions can be avoided with proper preparation. Finally, Safecoat products are formulated to work together. Of course, always read the application instructions before beginning the job.
RE-COATING:
Under normal conditions, Safecoat Zero VOC Eggshell, Flat, Pearl, and Semi-Gloss can be re-coated after 4 hours. For best results, wait at least 8 hours before re-coating. Normal conditions include: a dry surface, access to fresh air flow, moderate humidity, and temperatures above 55°F. Thick application, high humidity, or conditions other than normal will cause paint to dry and cure more slowly. Drying and curing time can be accelerated by moving fresh air over the painted surface, but re-coating before the time period noted above is not recommended.
APPLICATION:
Always have adequate ventilation. Surface should be completely dry before application. Before using, stir well, then apply with a high quality nylon or synthetic bristle brush or roller of appropriate nap (1/4”-3/8” nap recommended). Do not apply in thick films or load paint onto the surface. Thin coats are better than one thick coat. For spraying, dilute if necessary with up to 1/2 pint of water per gallon. Use an airless sprayer, minimum 2000 p.s.i., with a .015-.017 tip. Use a 60 mesh filter. When spraying, do not substitute back rolling for a second coat. Always use a painter’s mask when spraying. For full-coverage application, overlap preceding application with 1/4 to 1/2 the fan width at a distance of 18” from surface.
Tech Data Sheet available upon request
All sales are final, please email with serious inquiries only, thank you!