...
▲
favorite
favorite
hide
unhide
flag
flagged

Posted

Contact Information:

print

WORKBENCH or DJ TABLE 59"L x 29"D x 32-39.5"H adjustable height - $80 (BAKER)

‹ image 1 of 12 ›
WORKBENCH or DJ TABLE 59"L x 29"D x 32-39.5"H adjustable height 1
WORKBENCH or DJ TABLE 59"L x 29"D x 32-39.5"H adjustable height 1 thumbnailWORKBENCH or DJ TABLE 59"L x 29"D x 32-39.5"H adjustable height 2 thumbnailWORKBENCH or DJ TABLE 59"L x 29"D x 32-39.5"H adjustable height 3 thumbnailWORKBENCH or DJ TABLE 59"L x 29"D x 32-39.5"H adjustable height 4 thumbnailWORKBENCH or DJ TABLE 59"L x 29"D x 32-39.5"H adjustable height 5 thumbnailWORKBENCH or DJ TABLE 59"L x 29"D x 32-39.5"H adjustable height 6 thumbnailWORKBENCH or DJ TABLE 59"L x 29"D x 32-39.5"H adjustable height 7 thumbnailWORKBENCH or DJ TABLE 59"L x 29"D x 32-39.5"H adjustable height 8 thumbnailWORKBENCH or DJ TABLE 59"L x 29"D x 32-39.5"H adjustable height 9 thumbnailWORKBENCH or DJ TABLE 59"L x 29"D x 32-39.5"H adjustable height 10 thumbnailWORKBENCH or DJ TABLE 59"L x 29"D x 32-39.5"H adjustable height 11 thumbnailWORKBENCH or DJ TABLE 59"L x 29"D x 32-39.5"H adjustable height 12 thumbnail

google map

condition: excellent
make / manufacturer: Ridgid, homemade
size / dimensions: 59"W x 29"D x 32-39.5"H

QR Code Link to This Post

Selling this sturdy table I made for mobile DJ use OR as a general workbench. I needed something very sturdy of a particular size and with adjustable height for different height people to use - and it's impossible to find all three of those things in one table so I built it! I needed it to be very sturdy for turntable use and it definitely delivers for that. Table will fit a full-size (up to 13" wide) mixer and two turntables with plenty of width to spare, easily. It will also fit a pair of smaller CDJs or even large CDJs (like CDJ3000) if you rotate turntables into 'battle' orientation - so it's a large and configurable table! Deep enough to easily support FX, laptop stands, etc. Holes are cut in table to allow you to pass all your cables through for a clean setup.

Repeating again - this table is super sturdy and does not sway or flex unlike most folding tables.

Table dimensions are 59" long x 29" deep with height of top above ground adjustable between 32-39.5".

Table is based on a pair of VERY sturdy, quick setup and adjustable height Ridgid 230710 sawhorses that are each rated to 1500lbs capacity (MSRP $70 each). Each of the 4 corners of each sawhorse are individually height adjustable in 1"increments which allows you to adjust the table to be level on rough / uneven surfaces - I've done so many times.

https://www.homedepot.com/p/RIDGID-32-in-Polypropylene-Folding-Sawhorse-with-Adjustable-Heavy-Duty-Metal-Legs-3000-lbs-Capacity-and-Under-Storage-Space-230710/302917754

The sawhorses are positioned and oriented such that your feet don't run into them - even when DJing B2B with another person, etc.

I have a good 12 port Belkin BE112230-08 surge protector mounted underneath - with long 15' heavy cord. This allows you to run any DJ equipment or power tools while surge-protected, from right under table. Pass cables through the holes in table for a clean setup.

https://www.amazon.com/dp/B000J2EN4S?ref=emc_p_m_5_i_atc&th=1

Table breaks down for easy transport / storage, assembles in a few minutes. 4x 1/4" machine screws hold table top to sawhorses.

post id: 7898733214

posted:

updated:

♥ best of [?]

loading
reading
writing
saving
searching

refresh the page.